资源类型

期刊论文 97

年份

2023 7

2022 9

2021 7

2020 7

2019 12

2018 3

2017 3

2016 3

2015 4

2014 8

2013 1

2012 2

2011 5

2010 7

2009 5

2008 2

2007 5

2006 2

2005 1

2003 1

展开 ︾

关键词

V形坑 1

优化 1

位移与滑动形式 1

体积应变 1

内衬混凝土 1

剪切和弯曲的共同作用 1

剪切带 1

剪切应力 1

剪切应变 1

剪切波 1

剪应力强度包线 1

剪胀性 1

加强筋 1

动力响应 1

动态强度 1

动态硬度 1

压板抗滑试验 1

压硬性 1

固定床 1

展开 ︾

检索范围：

排序： 展示方式：

Predicting the capacity of perfobond rib shear connector using an ANN model and GSA method

Guorui SUN; Jun SHI; Yuang DENG

《结构与土木工程前沿（英文）》 2022年 第16卷 第10期   页码 1233-1248 doi: 10.1007/s11709-022-0878-1

摘要： Due to recent advances in the field of artificial neural networks (ANN) and the global sensitivity analysis (GSA) method, the application of these techniques in structural analysis has become feasible. A connector is an important part of a composite beam, and its shear strength can have a significant impact on structural design. In this paper, the shear performance of perfobond rib shear connectors (PRSCs) is predicted based on the back propagation (BP) ANN model, the Genetic Algorithm (GA) method and GSA method. A database was created using push-out test test and related references, where the input variables were based on different empirical formulas and the output variables were the corresponding shear strengths. The results predicted by the ANN models and empirical equations were compared, and the factors affecting shear strength were examined by the GSA method. The results show that the use of ANN model optimization by GA method has fewer errors compared to the empirical equations. Furthermore, penetrating reinforcement has the greatest sensitivity to shear performance, while the bonding force between steel plate and concrete has the least sensitivity to shear strength.

关键词： perfobond rib shear connector     shear strength     ANN model     global sensitivity analysis    

HTML PDF 收藏

Modeling of shear walls using finite shear connector elements based on continuum plasticity

Ulf Arne GIRHAMMAR, Per Johan GUSTAFSSON, Bo KÄLLSNER

《结构与土木工程前沿（英文）》 2017年 第11卷 第2期   页码 143-157 doi: 10.1007/s11709-016-0377-3

摘要： Light-frame timber buildings are often stabilized against lateral loads by using diaphragm action of roofs, floors and walls. The mechanical behavior of the sheathing-to-framing joints has a significant impact on the structural performance of shear walls. Most sheathing-to-framing joints show nonlinear load-displacement characteristics with plastic behavior. This paper is focused on the finite element modeling of shear walls. The purpose is to present a new shear connector element based on the theory of continuum plasticity. The incremental load-displacement relationship is derived based on the elastic-plastic stiffness tensor including the elastic stiffness tensor, the plastic modulus, a function representing the yield criterion and a hardening rule, and function representing the plastic potential. The plastic properties are determined from experimental results obtained from testing actual connections. Load-displacement curves for shear walls are calculated using the shear connector model and they are compared with experimental and other computational results. Also, the ultimate horizontal load-carrying capacity is compared to results obtained by an analytical plastic design method. Good agreements are found.

关键词： shear walls     wall diaphragms     finite element modelling     plastic shear connector     analytical modelling     experimental comparison    

HTML PDF 收藏

Study on the interfacial shear behavior of steel reinforced concrete (SRC) members with stud connectors

Zihua ZHANG,Junhua LI,Lei ZHANG,Kai YU

《结构与土木工程前沿（英文）》 2014年 第8卷 第2期   页码 140-150 doi: 10.1007/s11709-014-0250-1

摘要： Statically push-out tests of 20 steel reinforced concrete short columns (SRCSC) with stud connectors on the surface of shape steel after fire and two SRCSC under ambient temperature were carried out, in order to study the failure mode, load-slip relationship and the interfacial shear transfer of SRC members after fire. Experimental results show that the typical failure modes and load-slip curves of SRCSC after fire are almost the same as the case under ambient temperature. The interfacial shear transfer of SRCSC declines exponentially not only with the increase of the peak temperature the specimen experienced but also with the increase of the peak temperature duration. The interfacial shear transfer of the specimens with studs arranged at the steel web is much higher than those with studs arranged at the steel flange. Empirical formulas of SRCSC interfacial shear transfer after fire are proposed, and the calculated results generally agree well with the experimental results.

关键词： steel reinforced concrete (SRC)     short column     stud connector     after fire     interfacial shear transfer    

HTML PDF 收藏

performance of a façade precast concrete sandwich panel enabled by a bar-type basalt fiber-reinforced polymer connector

《结构与土木工程前沿（英文）》 2023年 第17卷 第1期   页码 122-137 doi: 10.1007/s11709-022-0894-1

摘要： In this study, a novel diagonally inserted bar-type basalt fiber reinforced polymer (BFRP) connector was proposed, aiming to achieve both construction convenience and partially composite behavior in precast concrete sandwich panels (PCSPs). First, pull-out tests were conducted to evaluate the anchoring performance of the connector in concrete after exposure to different temperatures. Thereafter, direct shear tests were conducted to investigate the shear performance of the connector. After the test on the individual performance of the connector, five façade PCSP specimens with the bar-type BFRP connector were fabricated, and the out-of-plane flexural performance was tested under a uniformly distributed load. The investigating parameters included the panel length, opening condition, and boundary condition. The results obtained in this study primarily indicated that 1) the bar-type BFRP connector can achieve a reliable anchorage system in concrete; 2) the bar-type BFRP connector can offer sufficient stiffness and capacity to achieve a partially composite PCSP; 3) the boundary condition of the panel considerably influenced the out-of-plane flexural performance and composite action of the investigated façade PCSP.

关键词： precast concrete sandwich panel     basalt fiber reinforced polymer     pull-out performance     shear performance     out-of-plane flexural performance    

HTML PDF 收藏

Comparison of shallow tunneling method with pile and rib method for construction of subway station in

Sina AMIRI; Ali Naghi DEHGHAN

《结构与土木工程前沿（英文）》 2022年 第16卷 第6期   页码 704-717 doi: 10.1007/s11709-021-0746-4

摘要： In the present study, a comparison between the new shallow tunneling method (STM) and the traditional pile and rib method (PRM) was conducted to excavate and construct subway stations in the geological conditions of Tehran. First, by selecting Station Z6 located in the Tehran Subway Line 6 as a case study, the construction process was analyzed by PRM. The maximum ground settlement of 29.84 mm obtained from this method was related to the station axis, and it was within the allowable settlement limit of 30 mm. The acceptable agreement between the results of numerical modeling and instrumentation data indicated the confirmation and accuracy of the excavation and construction process of Station Z6 by PRM. In the next stage, based on the numerical model validated by instrumentation data, the value of the ground surface settlement was investigated during the station excavation and construction by STM. The results obtained from STM showed a significant reduction in the ground surface settlement compared to PRM. The maximum settlement obtained from STM was 6.09 mm as related to the front of the excavation face. Also, the sensitivity analysis results denoted that in addition to controlling the surface settlement by STM, it is possible to optimize some critical geometric parameters of the support system during the station excavation and construction.

关键词： shallow tunneling method     pile and rib method     ground surface settlement     subway station construction     numerical modeling    

HTML PDF 收藏

Parametric equations for notch stress concentration factors of rib–deck welds under bending loading

《结构与土木工程前沿（英文）》 2021年 第15卷 第3期   页码 595-608 doi: 10.1007/s11709-021-0720-1

摘要： The effective notch stress approach for evaluating the fatigue strength of rib–deck welds requires notch stress concentration factors obtained from complex finite element analysis. To improve the efficiency of the approach, the notch stress concentration factors for three typical fatigue-cracking modes (i.e., root–toe, root–deck, and toe–deck cracking modes) were thoroughly investigated in this study. First, we developed a model for investigating the effective notch stress in rib–deck welds. Then, we performed a parametric analysis to investigate the effects of multiple geometric parameters of a rib–deck weld on the notch stress concentration factors. On this basis, the multiple linear stepwise regression analysis was performed to obtain the optimal regression functions for predicting the notch stress concentration factors. Finally, we employed the proposed formulas in a case study. The notch stress concentration factors estimated from the developed formulas show agree well with the finite element analysis results. The results of the case study demonstrate the feasibility and reliability of the proposed formulas. It also shows that the fatigue design curve of FAT225 seems to be conservative for evaluating the fatigue strength of rib–deck welds.

关键词： notch stress concentration factor     rib–deck weld     parametric analysis     regression analysis     parametric equation    

HTML PDF 收藏

Ribbed strip rolling by three-dimensional finite element method combining extremely thin array of elements

Zhengyi JIANG,

《机械工程前沿（英文）》 2010年 第5卷 第1期   页码 52-60 doi: 10.1007/s11465-009-0087-9

摘要： In this paper, a three-dimensional finite element modelling of the ribbed strip rolling is carried out, coupling the use of an extremely thin array of elements that is equivalent to the calculation of the additional shear deformation work rate occurred by the velocity discontinuity in the roll bite. The formulation of the finite element modelling by adding a rib inclined contact surface boundary condition is derived, and the performance of the proposed method is conducted. The simulated rib height, forward slip, and the pulling down of rib height have been compared with the measured values and are in good agreement. The equivalent strain rate of the rib was obtained in the simulation. The effect of the rib inclined angle on pulling down of rib height has also been discussed, which is helpful in optimizing the design of the rib inclined angle.

关键词： rib inclined contact boundary condition     ribbed strip     extremely thin elements     pulling down of rib height     finite element modelling    

HTML PDF 收藏

Robust optimization of the billet for isothermal local loading transitional region of a Ti-alloy rib-web

Ke WEI, Xiaoguang FAN, Mei ZHAN, Miao MENG

《机械工程前沿（英文）》 2018年 第13卷 第3期   页码 376-384 doi: 10.1007/s11465-018-0500-3

摘要：

Billet optimization can greatly improve the forming quality of the transitional region in the isothermal local loading forming (ILLF) of large-scale Ti-alloy rib-web components. However, the final quality of the transitional region may be deteriorated by uncontrollable factors, such as the manufacturing tolerance of the preforming billet, fluctuation of the stroke length, and friction factor. Thus, a dual-response surface method (RSM)-based robust optimization of the billet was proposed to address the uncontrollable factors in transitional region of the ILLF. Given that the die underfilling and folding defect are two key factors that influence the forming quality of the transitional region, minimizing the mean and standard deviation of the die underfilling rate and avoiding folding defect were defined as the objective function and constraint condition in robust optimization. Then, the cross array design was constructed, a dual-RSM model was established for the mean and standard deviation of the die underfilling rate by considering the size parameters of the billet and uncontrollable factors. Subsequently, an optimum solution was derived to achieve the robust optimization of the billet. A case study on robust optimization was conducted. Good results were attained for improving the die filling and avoiding folding defect, suggesting that the robust optimization of the billet in the transitional region of the ILLF was efficient and reliable.

关键词： isothermal local loading forming     rib-web component     transitional region     robust optimization     dual response surface method    

HTML PDF 收藏

大孔径光纤过渡器中光波特性分析

王云明,孙小菡,张明德

《中国工程科学》 2002年 第4卷 第10期   页码 52-56

摘要：

提出了基于束传输法（BPM）的大孔径光纤锥形过渡器理论分析模型。讨论了过渡器在纵向边界线性和非线性情况下（包括类似正弦型和余弦型变化），分别以大小端作为输入端口，耦合角度以及耦合长度对过渡器的损耗和耦合效率的影响，得出了过渡器最佳纵向边界、耦合角度和耦合长度。

关键词： 束传输法（BPM）     大孔径光纤     锥形过渡器     插入损耗    

HTML PDF 收藏

Nonlinear numerical simulation of punching shear behavior of reinforced concrete flat slabs with shear-heads

Dan V. BOMPA, Ahmed Y. ELGHAZOULI

《结构与土木工程前沿（英文）》 2020年 第14卷 第2期   页码 331-356 doi: 10.1007/s11709-019-0596-5

摘要： This paper examines the structural response of reinforced concrete flat slabs, provided with fully-embedded shear-heads, through detailed three-dimensional nonlinear numerical simulations and parametric assessments using concrete damage plasticity models. Validations of the adopted nonlinear finite element procedures are carried out against experimental results from three test series. After gaining confidence in the ability of the numerical models to predict closely the full inelastic response and failure modes, numerical investigations are carried out in order to examine the influence of key material and geometric parameters. The results of these numerical assessments enable the identification of three modes of failure as a function of the interaction between the shear-head and surrounding concrete. Based on the findings, coupled with results from previous studies, analytical models are proposed for predicting the rotational response as well as the ultimate strength of such slab systems. Practical recommendations are also provided for the design of shear-heads in RC slabs, including the embedment length and section size. The analytical expressions proposed in this paper, based on a wide-ranging parametric assessment, are shown to offer a more reliable design approach in comparison with existing methods for all types of shear-heads, and are suitable for direct practical application.

关键词： non-linear numerical modelling     concrete damage plasticity     RC flat slabs     shear-heads     punching shear    

HTML PDF 收藏

Behaviour of self-centring shear walls——A state of the art review

《结构与土木工程前沿（英文）》 2023年 第17卷 第1期   页码 53-77 doi: 10.1007/s11709-022-0850-0

摘要： The application of unbonded post-tensioning (PT) in structural walls has led to the development of advanced self-centring (rocking) shear wall systems that has significant advantages, including accelerated construction due to the incorporation of prefabricated elements and segmental construction for different materials (e.g., concrete, masonry, and timber), reduced residual drifts, and little damage upon extreme seismic and wind loads. Concrete, masonry, and timber are often used for the construction of unbonded PT structural wall systems. Despite extensive research since the 1980s, there are no well-established design guidelines available on the shear wall configuration with the required energy dissipation system, joint’s locations and acceptance criteria for shear sliding, confinement, seismic performance factors, PT loss, PT force range and residual drifts of shear walls subjected to lateral loads. In this research a comprehensive state-of-the-art literature review was performed on self-centring shear wall system. An extensive study was carried out to collect a database of 100 concrete, masonry, and self-centring shear wall tests from the literature. The established database was then used to review shear walls’ configurations, material, and components to benchmark requirements applicable for design purposes. The behaviour of concrete, masonry and timber shear walls were compared and critically analysed. The general behaviour, force-displacement performance of the walls, ductility, and seismic response factors, were critically reviewed and analysed for different self-centring wall systems to understand the effect of different parameters including configurations of the walls, material used for construction of the wall (concrete, masonry, timber) and axial stress ratio. The outcome of this research can be used to better understand the behaviour of self-centring wall system in order to develop design guidelines for such walls.

关键词： self-centring shear walls     rocking walls     energy dissipation     seismic performance factors     PT loss     residual drift    

HTML PDF 收藏

Prediction of the shear wave velocity

Amoroso SARA

《结构与土木工程前沿（英文）》 2014年 第8卷 第1期   页码 83-92 doi: 10.1007/s11709-013-0234-6

摘要： The paper examines the correlations to obtain rough estimates of the shear wave velocity from non-seismic dilatometer tests (DMT) and cone penetration tests (CPT). While the direct measurement of is obviously preferable, these correlations may turn out useful in various circumstances. The experimental results at six international research sites suggest that the DMT predictions of from the parameters (material index), (horizontal stress index), (constrained modulus) are more reliable and consistent than the CPT predictions from (cone resistance), presumably because of the availability, by DMT, of the stress history index .

关键词： horizontal stress index     shear wave velocity     flat dilatometer test     cone penetration test    

HTML PDF 收藏

An investigation into the heat transfer characteristics of spiral wall with internal rib in a supercritical

TANG Renhu, YIN Fei, WANG Haijun, CHEN Tingkuan

《能源前沿（英文）》 2007年 第1卷 第3期   页码 300-304 doi: 10.1007/s11708-007-0043-5

摘要： Within the pressure range of 9–28 MPa, mass velocity range of 600–1 200 kg/(m · s), and heat flux range of 200–500 kW/m, experiments were performed to investigate the heat transfer to water in the inclined upward internally ribbed tube with an inclined angle of 19.5 degrees, a maximum outer diameter of 38.1 mm, and a thickness of 7.5 mm. Based on the experiments, it was found that heat transfer enhancement of the internally ribbed tube could postpone departure from nucleate boiling at the sub-critical pressure. However, the heat transfer enhancement decreased near the critical pressure. At supercritical pressure, the temperature difference between the wall and the fluid increased near the pseudo-critical temperature, but the increase of wall temperature was less than that of departure from nucleate boiling at sub-critical pressure. When pressure is closer to the critical pressure, the temperature difference between the wall and the fluid increased greatly near the pseudo-critical temperature. Heat transfer to supercritical water in the inclined upward internally ribbed tube was enhanced or deteriorated near the pseudo-critical temperature with the variety of ratio between the mass velocity and the heat flux. Because the rotational flow of the internal groove reduced the effect of natural convection, the internal wall temperature of internally ribbed tube uniformly distributed along the circumference. The maximum internal wall temperature difference of the tube along the circumference was only 10 degrees when the fluid enthalpy exceeded 2 000 J/g. Considering the effect of acute variety of the fluid property on heat transfer, the correlation of heat transfer coefficient on the top of the internally ribbed tube was provided.

关键词： m ·     diameter     critical pressure     sub-critical pressure     maximum    

HTML PDF 收藏

On braced trapezoidal corrugated steel shear panels: An experimental and numerical study

《结构与土木工程前沿（英文）》 2023年 第17卷 第3期   页码 396-410 doi: 10.1007/s11709-023-0934-5

摘要： In this study, a new system consisting of a combination of braces and steel infill panels called the braced corrugated steel shear panel (BCSSP) is presented. To obtain the hysteretic behavior of the proposed system, the quasi-static cyclic performances of two experimental specimens were first evaluated. The finite element modeling method was then verified based on the obtained experimental results. Additional numerical evaluations were carried out to investigate the effects of different parameters on the system. Subsequently, a relationship was established to estimate the buckling shear strength of the system without considering residual stresses. The results obtained from the parametric study indicate that the corrugated steel shear panel (CSSP) with the specifications of a = 30 mm, t = 2 mm, and θ = 90° had the highest energy dissipation capacity and ultimate strength while the CSSP with the specifications of a = 30 mm, t = 2 mm, and θ = 30° had the highest initial stiffness. It can thus be concluded that the latter CSSP has the best structural performance and that increasing the number of corrugations, corrugation angle, and plate thickness and decreasing the sub-panel width generally enhance the performance of CSSPs in terms of the stability of their hysteretic behaviors.

关键词： trapezoidal corrugated plate     steel shear panel     braced steel shear panel     experimental study     buckling resistance.    

HTML PDF 收藏

Experimental study on shear behavior of reinforced concrete beams with web horizontal reinforcement

Dong XU,Yu ZHAO,Chao LIU

《结构与土木工程前沿（英文）》 2014年 第8卷 第4期   页码 325-336 doi: 10.1007/s11709-014-0080-1

摘要： In determining the shear capacity of reinforced concrete beams, current codes do not provide any calculation method to evaluate the influence of web horizontal reinforcement, although they exist as structural reinforcements (or skin reinforcement). The present paper comprises results of 11 reinforced concrete beams in an effort to investigate the influence of web horizontal reinforcement on the shear behavior of reinforced concrete beams. The primary design variables are the shear-span-depth ratio, different reinforcement ratio of stirrups and web horizontal reinforcement. Influence of web horizontal reinforcement on crack patterns and failure mode was studied. It was found that web horizontal reinforcement can increase the shear capacity of the beams and restrain growth of inclined cracks effectively. Test results are very valuable, as very few references of shear tests can be found focusing on the effect of web horizontal reinforcement on the shear capacity of the beams.

关键词： reinforced concrete beam     shear strength     web horizontal reinforcement     experiments    

HTML PDF 收藏

标题 作者 时间 类型 操作

Predicting the capacity of perfobond rib shear connector using an ANN model and GSA method

Guorui SUN; Jun SHI; Yuang DENG

期刊论文

Modeling of shear walls using finite shear connector elements based on continuum plasticity

Ulf Arne GIRHAMMAR, Per Johan GUSTAFSSON, Bo KÄLLSNER

期刊论文

Study on the interfacial shear behavior of steel reinforced concrete (SRC) members with stud connectors

Zihua ZHANG,Junhua LI,Lei ZHANG,Kai YU

期刊论文

performance of a façade precast concrete sandwich panel enabled by a bar-type basalt fiber-reinforced polymer connector

期刊论文

Comparison of shallow tunneling method with pile and rib method for construction of subway station in

Sina AMIRI; Ali Naghi DEHGHAN

期刊论文

Parametric equations for notch stress concentration factors of rib–deck welds under bending loading

期刊论文

Ribbed strip rolling by three-dimensional finite element method combining extremely thin array of elements

Zhengyi JIANG,

期刊论文

Robust optimization of the billet for isothermal local loading transitional region of a Ti-alloy rib-web

Ke WEI, Xiaoguang FAN, Mei ZHAN, Miao MENG

期刊论文

大孔径光纤过渡器中光波特性分析

王云明,孙小菡,张明德

期刊论文

Nonlinear numerical simulation of punching shear behavior of reinforced concrete flat slabs with shear-heads

Dan V. BOMPA, Ahmed Y. ELGHAZOULI

期刊论文

Behaviour of self-centring shear walls——A state of the art review

期刊论文

Prediction of the shear wave velocity

Amoroso SARA

期刊论文

An investigation into the heat transfer characteristics of spiral wall with internal rib in a supercritical

TANG Renhu, YIN Fei, WANG Haijun, CHEN Tingkuan

期刊论文

On braced trapezoidal corrugated steel shear panels: An experimental and numerical study

期刊论文

Experimental study on shear behavior of reinforced concrete beams with web horizontal reinforcement

Dong XU,Yu ZHAO,Chao LIU

期刊论文